整理線路是機房布線中最重要的一環，線路整理好與壞，會直接影響布線系統後期的維護和管理。那麼，機房布線有什麼布線規範呢?

1. 核心設備布線規範：光纖布放地方不能擋住網絡設備進出封口，每隔一段距離要用魔術貼扎帶捆綁，並貼好標籤，插到設備端口時盡量不要將標籤擋住，要留有一定空間方便插撥光纖。

2. 內網接入布線規範：通過理線器整理，每根網線標有不同顏色的標籤區分，另一端則放到機架內托盤位置。

3. 橋架內布線規範：設備間的線纜需通過橋架走線，橋架內的光纖和網線分開整齊布放，每隔一段距離用扎帶捆綁。

4. 機櫃內布線規範：不同線纜用不同顏色的線區分，預留線纜長度不宜過長，能從一側PDU到另外一側PDU即可。

* * * * * *

創世服務有限公司是一間提供專業數據中心架設公司，擁有一群專業團隊貼心地關注客戶的要求，並提供優質的服務。

想了解更多關於「機房布線有什麼布線規範」的內容，請瀏覽創世官網：**livservices.com.hk

地址: 香港觀塘鴻圖道37-39號鴻泰工業大廈4樓4室

電話：852-31063235

——————

What are the wiring specifications for the equipment room wiring?

1. Core equipment wiring specification: The fiber placement area can't block the network equipment from entering and leaving the seal. It should be bundled with Velcro straps at intervals and labeled. When plugging into the device port, try not to block the label. Space is convenient for plugging and unplugging fiber.

2. Internal network access wiring specification: through the cable organizer, each network cable is marked with a label of different colors, and the other end is placed in the tray position in the rack.

3. Wiring specification in the bridge: The cables between the devices need to be routed through the bridge. The optical fibers and the network cables in the bridge are placed separately and neatly, and bundled at intervals.

4. Cabling specification in the cabinet: Different cables are distinguished by different color lines. The reserved cable length should not be too long. It can be from one side PDU to the other side PDU.

* * * * * *

LIV is a professional data center to set up a company, with a group of professional team intimate attention to customer requirements, and provide quality services.

For more information about 'What are the wiring specifications for the equipment room wiring?'，please visit : **livservices.com.hk

Address: Unit 4, 4/F., Hung Tai Industrial Building,37-39 Hung To Road, Kwun Tong, Hong Kong

Tel: +852 3106 3235